GFiber Phone Box Device Information
The Google Fiber Phone Box (GFPB100) features a single phone port and single Ethernet connection to the Internet. The dimensions of the Phone Box are 2.75" W x 2.75" D x 1.0" H.
What's in the box:
- Phone Box
- AC adapter
- Phone cord
- Short Ethernet cable
At the time of your installation, the Phone Box will be connected to AC power, your router, and your phone wiring.
Troubleshooting Light Statuses
When the Phone Box is properly connected, the LED on the front appears solid blue. If the LED does not display solid blue 2-3 minutes after being connected to power, contact GFiber customer support. Although we don't expect you to troubleshoot your own Phone Box, the following LED states might help customer support diagnose your issue.
- Solid red: Powering up or hardware failure
- Fast blinking red: Connection failure
- Solid blue: Successful connection
- Blinking blue: Connecting to network
- Fast blinking blue: IP address acquired
WARNINGS:
Failure to follow these safety instructions can result in fire, electric shock, or other injury or damage to the GFiber Phone Box or your property.
Do not attempt to open or modify the GFiber Phone Box. If you do so, you run the risk of electric shock or injury. There are no user-serviceable parts inside the GFiber Phone Box.
To reduce the risk of fire or electric shock, do not expose your GFiber Phone Box to the outdoors, liquid, moisture, excessive heat, or fire.
The GFiber Phone Box packaging may include plastic bags and tie-wraps. Please dispose of these properly and keep them out of reach of children, as they can present a choking hazard. Keep the GFiber Phone Box, its cords, and its accessories out of the reach of small children.
Please read these instructions before using your GFiber Phone Box. We do not want you to get hurt or your GFiber Phone Box to get damaged.
- Do not use your GFiber Phone Box near water. If you need to clean it, do not use a wet towel. Keep your GFiber Phone Box dry.
- Do not place your GFiber Phone Box near any heat sources, such as hot appliances like heaters and radiators, other electronics like computers and stereos, or inside your fireplace. Your GFiber Phone Box is cool, and you should help it to stay that way.
- The GFiber Phone Box is for indoor use only. Please do not use it outside.
- Only plug in cables and accessories specified and as directed by GFiber.
- Protect your GFiber Phone Box power cord by allowing it to loosely rest between the device and the power outlet. Do not stretch it or compress it between objects.
- Do not try to open, modify, or repair your GFiber Phone Box, which can cause electric shock or injury to you. Any customer modification not expressly approved by Google voids your authority to operate the equipment and will void your device warranty. If you think something is wrong with your GFiber Phone Box, please contact GFiber customer support.
- If your GFiber Phone Box gets wet, its power cord appears damaged, or it is generally not functioning properly, please contact GFiber customer support.
- The GFiber Phone Box does not have an on/off switch. If you want to turn it off, unplug it.
- Handle your GFiber Phone Box with care; do not drop or shake it.
- It’s normal for your GFiber Phone Box to get warm, but it needs ventilation to continue to function properly. Place the GFiber Phone Box on an unobstructed, solid surface, and not on a soft surface, such as a carpeted floor, which may block airflow.
- The GFiber Phone Box is Google Fiber’s property. Loss or damage may obligate you to pay Google Fiber the replacement cost of the device.
Regulatory compliance information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC exposure requirements, a separation distance of at least 20 cm should be maintained between the antenna of this device and persons during device operation. Operations at closer than this distance are not recommended.
Refer to the Google Fiber Device Limited Warranty.
Google clean and green
We care about your GFiber Phone Box, your service, your home, your fiberhood, and the container for all these things—planet Earth. Our sustainability commitments are available at google.com/green.
If your GFiber Phone Box needs to be replaced or returned to Google, please do not dispose of your GFiber Phone Box in the trash. Please contact GFiber customer support for details about how to return it for proper disposal.